Xiaomi Mijia Smart Switch
Features:
Xiaoai voice control │ Easy to replace
Intelligent linkage | OTA upgrade
Specifications:
“Single Key”
Product model: DHKG01ZM
Rated input: 220V~50Hz
Wireless connection: BLE Mesh
Rated load: ≤200W
Load type: energy-saving lamp/LED lamp/fluorescent lamp/incandescent lamp
CMIT ID: 2020DP5383
Minimum support: 3W energy saving lamp/5W LED lamp/16W fluorescent lamp
Protection level: lP30
Working temperature: -10℃ ~ 40℃
Back size of the installation box: 58 × 58 × 22.8 mm
“Double Key”
Product model: DHKG02ZM
Rated input: 220V~50Hz
Wireless connection: BLE Mesh
Rated load: ≤200W(Dual Circuit)
Load type: energy-saving lamp/LED lamp/fluorescent lamp/incandescent lamp
CMIT ID: 2020DP5382
Minimum support: 3W energy saving lamp/5W LED lamp/16W fluorescent lamp
Protection level: lP30
Working temperature: -10℃ ~ 40℃
Back size of the installation box: 58 × 58 × 22.8 mm
Note:
1.This is wall switch ,not a wireless version,need to be wired for use,please note it;
2.This product supports remote control, intelligent linkage and other functions, and it needs to be used with a device that supports the Bluetooth Mesh gateway function.
Installation Instruction:
1. Use your fingertips to buckle the position of the card slot in the picture, and open the button cover.
2. Connecting wires according to the wiring schematic diagram.
3. Use screws to fix the switch to the wall junction box, and turn the power button to the “ON” position.
4. Reinstall the button cover and the installation is complete.
* Before installation, please make sure that the home power supply is turned off.
Notes:
● Applicable to most lamps on the market: minimum support 3W energy-saving lamps/5WLED lamps/16W fluorescent lamps.
Lamps, smart lamps, and dimmable lamps that are not in the scope of application may cause abnormalities such as abnormal functions of the switch or “light flashing” when the light is off.
In addition, this product has an overload protection function. Do not adapt this product to lamps that exceed the upper limit of the rated power.
And non-lamp electrical appliances (such as: Yuba, exhaust fan and other electrical appliances), may cause permanent damage to this product.
● Control the switch as you wish: In order to ensure the experience, it needs to be used with the Bluetooth Mesh gateway.
● 80,000 times repeated pressings: According to Chapter 19.101 of GB/T16915.2-2012, the number of operations has been increased from 40,000 to 80,000 by Zimi Lab.
● Easily replace traditional switches: Xiaomi Mijia smart switch (single billing control) into the installation box structure part size is 58X58X22.8mm, in line with the JB/T8593 standard.
Due to uncertain factors in the installation situation, it may cause installation failure or other problems, Please be sure to use the installation box that complies with local safety standards (such as China 3C certification standards).
When the mounting box is inserted too deep into the wall, the screws used with the product may be too short, and the user needs to match the mounting box screws with a suitable length.
● The above data are measured by Zimi Lab without special instructions, but due to changes in the objective environment, the data may be different or error.